Festool 488564 Longitudinal stop

Festool 488564 Longitudinal stop Reviews

Other Picture

Festool 488564 Longitudinal stop Feature

• Adjustable stop for use on MFT 800 and MFT 1080

Includes Longitudinal Stop - 488564

Visit Store Now !!

Detail Products

Detail Reviews

Sep 14, 2011 01:00:04

Powermatic 1791787 Low Profile Riving Knife

Powermatic 1791787 Low Profile Riving Knife Reviews

Other Picture

Powermatic 1791787 Low Profile Riving Knife Feature

• Rises and lowers with the blade, thus maintaining close blade/knife distance
• Helps prevent binding and kickback
• Remains installed for non-through cuts

Includes Low Profile Riving Knife - 1791787

Visit Store Now !!

Detail Products

• Powermatic 1791788 PM2000 Table Saw Dado Insert
• Powermatic 1791786 PM2000 Table Saw Zero Clearance Insert
• Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor
• Powermatic 1792000K Model PM 2000 3 Horsepower Cabinet Saw with 50-Inch Accu-Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1 Phase
• Powermatic 1791792 Pm2000-Tklprk: .079" Low Profile Rk

Detail Reviews

Sep 09, 2011 17:00:06

MJ Splitter Combo Package with Bonus 2 extra Splitters

MJ Splitter Combo Package with Bonus 2 extra Splitters Reviews

Other Picture

MJ Splitter Combo Package with Bonus 2 extra Splitters Feature

• Pkg. Contains two Splitters for 1/8" and two splitters for 3/32" Kerf Saw Blades
• Fool proof installation with Drill Guild, push in to install, pull up to remove
• For use with or without GRR-Ripper System
• Four alignment surfaces for different effects
• Use with zero clearance insert without existing splitter opening

Besides from the concept of perfect aligning drilling procedure, the other breakthrough concept is choice of tension control for different effects. Each MJ Splitter kit comes with two splitters, A & B with total of four surfaces, each surface extends a different distance from the center pins.

Visit Store Now !!

Detail Products

• Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw
• Gorilla Gripper 44010 Panel Carrier
• Wixey WR300 Digital Angle Gauge
• MSI-PRO 225-D 51120 Horizontal Quick-Release Toggle Clamps
• Gripper(TM) 200 Advanced System - Assorted Colors (Green or Yellow)

Detail Reviews

Jul 31, 2011 23:32:03

Corob Molding Knife: #42 Door Molding (Male)

Corob Molding Knife: #42 Door Molding (Male) Reviews

Other Picture

Corob Molding Knife: #42 Door Molding (Male) Feature

• Door Molding (Male)
• Package includes a set of 3 knives
• For use with Corob Cutter Molding Knife head or Craftsman Molding Knife head
• Made in the USA!

Corob Cutters machines all of their molding knives with precision CNC technology out of high speed steel blanks that are heat-treated, NOT carbide. This material is less expensive than carbide and allows you to sharpen the knives as they wear from use. To sharpen, use a few light strokes on an oil stone on the cutting face only. The unique screw/ball locking system provides a precision fit for knives each and every time. Choose from 48 shapes of molding knives to mix, match and create hundreds of custom moldings!

Visit Store Now !!

Detail Products

Detail Reviews

Jul 23, 2011 03:32:04

Festool Parallel Guide Extension Set

Festool Parallel Guide Extension Set Reviews

Other Picture

Festool Parallel Guide Extension Set Feature

• Adjustable stops ensuring perfect parallel position
• Great for repetitive cutting
• Precision engineered to strict tolerances
• Dual mechanical stops are fully adjustable
• Mounts to any length FS/2 guide rail (not included)

Use this set with your Festool plunge saw and any FS guide rail for table-saw precision and fast, consistent rips and crosscuts! Especially nice for repetitive cutting, the two long parallel guides engage the edge of your piece with adjustable stops ensuring perfect parallel position every time. Extensions connect to the guides, allowing for narrow rip cuts ranging from 1/16" to 7-11/16" wide.


Please note that the Parallel Guide components do not include a guide rail.


This system performs as well as a table saw for most cutting jobs and breaks down easily for simple storage and transport. Precision engineered to strict tolerances, the heavy duty metal components will ensure pinpoint accuracy throughout their long working life.


Additional features:
Ensures parallel cuts to an opposing straight edge. Does not rely on perpendicular reference points for accuracy. Great for squaring stock.
Integrated scale lets you set stops for desired width no measuring or marking necessary. Dual mechanical stops are fully adjustable and allow for repetitive cuts. Mounts to any length FS/2 guide rail (or combination of guide rails) for flexible customization.

Visit Store Now !!

Detail Products

• Festool 491594 Quick Clamp For MFT And Guide Rail System, 6 5/8" (168mm)
• Festool 482107 Guide Rail Connector
• Festool 488030 Clamping ElemenTS 2-Pack
• Festool 495415 Imperial/Metric Tape Measure
• Festool 491498 55" Guide Rail FS 1400 (1400mm)

Detail Reviews

Jun 27, 2011 15:32:04

32" ALUMINUM MITER T-TRACK FOR SEARS by Peachtree Woodworking - PW1037

32" ALUMINUM MITER T-TRACK FOR SEARS by Peachtree Woodworking - PW1037 Reviews

Other Picture

32" ALUMINUM MITER T-TRACK FOR SEARS by Peachtree Woodworking - PW1037 Feature

• Sears saws, miter slot is .008 of in. smaller than standard
• Slides into miter track or miter slot on your table saw
• Designed to fit Sears Table Saws
• Use on table saw extensions, drill press tables & band saw tables
• Figure A only - Figure B Not Included

32" Miter Track designed .008 of a in. smaller to fit Sears Saws

Visit Store Now !!

Detail Products

Detail Reviews

Jun 14, 2011 07:16:04

Woodhaven 4918B 18" Miter Slot Jig Bar

Woodhaven 4918B 18" Miter Slot Jig Bar Reviews

Other Picture

Woodhaven 4918B 18" Miter Slot Jig Bar Feature

• Precision machined nickel plated adjustable steel miter bar (17-3/4" long x 3/8" thick x .735" wide) has four adjustable plugs that eliminate all side play.
• Perfect bar to use on your shop-made jigs
• Fits standard 3/8" x 3/4" miter slot.
• Can be mounted with 10-24 machine screws or flat head wood screws, both included.
• Lifetime guarantee against defects in material or workmanship. Made in the USA!

Our nickel plated steel miter bars durability can't be beat. Plus its adjustable plugs eliminate all side play, dramatically improving the performance of any jig it's used on.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 02, 2011 00:16:04

Corob Molding Knife: #32 1/8" Radius Eased Edge

Corob Molding Knife: #32 1/8" Radius Eased Edge Reviews

Other Picture

Corob Molding Knife: #32 1/8" Radius Eased Edge Feature

• 1/8" Radius Eased Edge
• Package includes a set of 3 knives
• For use with Corob Cutter Molding Knife head or Craftsman Molding Knife head
• Made in the USA!

Corob Cutters machines all of their molding knives with precision CNC technology out of high speed steel blanks that are heat-treated, NOT carbide. This material is less expensive than carbide and allows you to sharpen the knives as they wear from use. To sharpen, use a few light strokes on an oil stone on the cutting face only. The unique screw/ball locking system provides a precision fit for knives each and every time. Choose from 48 shapes of molding knives to mix, match and create hundreds of custom moldings!

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 10:00:04

Leecraft JT-2L Zero Clearance Table Saw Insert (For Jet Xacta Saw Left Tilt)

Leecraft JT-2L Zero Clearance Table Saw Insert (For Jet Xacta Saw Left Tilt) Reviews

Other Picture

Leecraft JT-2L Zero Clearance Table Saw Insert (For Jet Xacta Saw Left Tilt) Feature

• Supports work right up to the blade
• Reduced chip-out and splintering
• Reduces sawdust expelled
• Handy stock alignment guide
• Reduces saw noise

LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. These 1/2" thick inserts are precision machined from a nearly frictionless melamine faced, high density phenolic laminate.Offer durability and flatness unobtainable from cheaper plastic inserts.Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen.Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Jet Left Tilt Zero Clearance Insert (#142271) does not fit Jet Xacta Saw Deluxe. Complete with instructions. Insert surface colors may vary.

Visit Store Now !!

Detail Products

• Freud LM74R010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Leecraft JT-164 Jet/Powermatic 64A Zero-Clearance Table Saw Insert
• The Handplane Book
• Building Kitchen Cabinets
• Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

Detail Reviews

May 18, 2011 00:00:06

Saw Depth Guide

Saw Depth Guide Reviews

Other Picture

Saw Depth Guide Feature

• Makes saw set up fast and easy
• Marked in inches and millimeters
• Saw depth guide

Use this aluminum saw depth gauge to make a fast and easy set up of blades on a radial arm, or hand-held circular and table saws from 1/8" to 2" in 1/8" increments. It is clearly marked in inches (both fractional and decimal) and millimeters.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 24, 2011 15:00:06

Magic Molder LRH 6-pc Set P-70

Magic Molder LRH 6-pc Set P-70 Reviews

Other Picture

Magic Molder LRH 6-pc Set P-70 Feature

• convert your table saw into a molder with patented quick change lever-lock plug system
• carbide tipped anti-kickback chip-limiter design for safe, quiet tooling
• electronically spin balanced & vibration free no minimun HP requirement
• 5/8 inch arbor 7 inch diameter 1.5mm bite limit
• for natural wood & composite materials. Made Entirely in USA

Now you can teach an old saw new tricks! The Magic Molder replaces your existing saw blade to produce custom molding. Works to convert any left or right tilt table saw that can accomodate a dado set.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 31, 2011 19:54:03

SKIL 80089 8 Wide Table Saw Extension Kit

SKIL 80089 8 Wide Table Saw Extension Kit Reviews

Other Picture

SKIL 80089 8 Wide Table Saw Extension Kit Feature

• Easy to assemble
• 24 1/2 Capacity

Skil 80089 8 in. Table Saw Extension Easy to assemble Includes mounting bolts 24 1/2 Capacity Weight3.9 lbs.

Visit Store Now !!

Detail Products

• SKIL 80092 Folding Table Saw Stand
• All in One Clamp XSP 9-Inch X 12-Inch Saw Plate
• XRP 8-Inch by 9-Inch Router Plate, Black
• Stanley 85-610 10-Inch Long MaxGrip Locking Adjustable Wrench

Detail Reviews

Mar 27, 2011 15:18:09

Festool 489571 Screw Clamps, 11-13/16"

Festool 489571 Screw Clamps, 11-13/16" Reviews

Other Picture

Festool 489571 Screw Clamps, 11-13/16" Feature

• A wide variety of clamping elements is available to secure any size or shape workpiece, including round pieces

Includes 11-13/16" (300mm) Clamps (2 pk) - 489571

Visit Store Now !!

Detail Products

• Festool 489570 Screw Clamps, 4-11/16"
• Festool 491594 Quick Clamp For MFT And Guide Rail System, 6 5/8" (168mm)
• Festool 492601 Guide Stop Adapter For OF 1400 And FS Guide Rails
• Festool 488030 Clamping ElemenTS 2-Pack
• Festool 482107 Guide Rail Connector

Detail Reviews

Mar 25, 2011 19:49:05